12 Free DIY Gun Rack Plans To Store Your Guns

DIY Gun Rack Plans

There is nowhere else in the world where gun culture is as strong as America.

Nevertheless, guns are not toys, and it’s expensive to buy gun racks. So it’s necessary to look for the right DIY gun rack plans.

After all, you can save quite a significant amount of money. The only price to pay is just to spend some hours fiddling around with these plans.

Check out these 12 free DIY gun rack plans to build a gun rack by yourself for storage safely and show off your guns.

1. Standing Gun Rack From Instructables

Standing Gun Rack

The core concept of this gun rack is easy accessibility and functionality for the guns. That is why its design ensures that all the guns are store standing.

You can easily grab the gun right away on your way out. It also doesn’t take up much space, only 10 inches wide and 28 inches long in total.

It can hold up to six guns. Each one will stay four inches apart from each other. This spacing provides sufficient spaces for most types of gun..

Of course, there are cons like sliding sideways in the rack base. You can add some cleats to the base.

Otherwise, you may put other recreational gear on here too. A fishing rod will not seem out of place next to your firearms.

Project details: instructables.com

2. DIY Rifle Rack For $20

This project focuses on being as effective as possible, whether cost or time. As a result, it is among the easiest and cheapest to do on this list. You can storage to 6 rifle guns with this rack.

All you need is some shelving boards from Lowe’s. Cut one of them into two sections 28 inches in length. Then, add evenly spaced holes in the middle of one board with a hole saw.

Draw lines according to the holed board into the other boards, cut along these lines. Finally, you just need to fit the whole thing together with some wood screws to obtain a fairly durable rack with cheap cost

Project details: tngun.com

3. Free Rifle Rack Plan

DIY Rifle Rack Plan

This plan is specifically for long-term gun storage, as it does not follow the grab-and-go standing design. Instead, it takes the horizontal approach not vertical, leaning to a decorative piece for you to show off your gun collection.

It has three barrel rests in total, limiting the number of guns stored to only three. However, each barrel rest is beautifully designed with smooth curves and artistic cuts.

The right barrel rest is also intentionally set up to be 1 inch higher than the left one. With this design, the rifle barrel will rest at the same level as the buttstock, ensuring no oil draining to the stock.

It also includes a part compartment small storage at the bottom so you can store small items.

Project details: wayneofthewoods.com

4. DIY Vertical Gun Rack Plan By The Unknown Cat

Most guns don’t have the same height, as the barrel lengths are significantly different due to the guns’ functions.

Instead of finding a one-size-fits-all solution, this plan has a clever solution of separating the barrel rest.

After counting the guns in your possession with the same relative height, you can cut pieces of the barrel rest wide enough to fit them all.

Then, you just need to attach these pieces to the wall at the same height as the gun’s length.

There is also something clever in the buttock rest. Rather than cutting holes into a big board, you cut appropriately-sized chunks and fit them together in an L shape. Then, you screw them together for a surprisingly stable base.

5. Reclaimed Pallet Wood Gun Rack

Reclaimed Pallet Gun Shelf

One can say that this gun rack is clearly the most basic plan. It involves nothing more than one rectangle frame, some pallet slat linings, and some hooks.

All in all, you won’t need to spend any longer than two hours to finish the whole thing, not counting the staining process.

Prepare the 23×46-inch frame, disassemble the pallet, attach the slats on the frame, and mount the hooks. And you’re good to go.

The gun rack itself also won’t take up much space, as it’s simply a board leaning against the wall.

Obviously, there will be some limitations as a result of this design. One of them is the fact that it can only store two guns at once.

Project details: instructables.com

6. DIY Gun Rack By Explosive Review

This gun rack is a lot lighter than its size suggests, but it does not sacrifice any strength. Such a feature comes from the fact that it is cut from a single sheet of plywood.

This decision ensures that the rack has better uniform structural integrity. You would also need fewer wood nails to fix the parts together.

The grid at the base is quite simple but still can prevent the guns from slipping. You only need to rip some strips and staple them to the base.

Moreover, the grid can support up to eleven guns. So if you want more capacity, you may add five more semicircles on the racks.

Woodworkers Treasure Chest

7. Wooden Gun Rack

Wooden Gun Rack

The classic horizontal gun rest style comes with all the fancy curves and interesting patterns. However, it differs in the way that it offers you more storage space hidden behind a compartment under the rack.

This space is very useful, though it takes only about ⅕ total length. You can store things that normally don’t fit on the rack.

For example, due to their small sizes, pistols and ammo will never be suitable to display on the rack in a meaningful way.

To make opening or closing the compartment easier, you can add some hinges, doors, and knobs.

Project details: instructables.com

8. DIY Rifle Rack Plan From Woodworking Corner

DIY Free Rifle Rack Plan

This plan is, without any doubt, the least demanding on materials. Not many projects can be done with just 2 1″x6″ boards and 1 single 1/4″ x 7″ x 21″ plywood panel.

Obviously, there is a payback in that the size of this rack is quite small, with the gap between the gun rest being only 21”.

It is not enough for some specialized assault rifles, but regular hunting rifles can still fit in.

On the other hand, the compartment below is quite spacious, enough to fit in at least 2 pistols.

Project details: woodworkingcorner.com

9. DIY Gun Rack By Gun Locker 75

Some of us have more guns than others, so the more decorative gun racks are simply not enough. This plan proposes a simple and cost-effective solution to this problem.

You don’t even need a buttock rest for this project, as the floor will suffice. Just get 2×4 materials with the same length as your room and fit them onto the wall with wood screws.

As for the barrel rest, some utility hooks are enough to keep them in place. All in all, this design allows you to fit in as many rifles as your room can allow, going as high as 40.

10. Field Rifle Rack

Field Rifle Rack

There are many beautiful, efficient, and unique gun rack designs, but almost all of them have 1 common weakness, immobility. That is not an issue with this plan, as it is foldable.

When you unfold it, it is capable of storing 8 rifles at the same time, with leather strip linings in the barrel sockets protecting the guns.

In its folded form, it measures only 2-3/4″ x 10″ x 29″, about the same as a usual business suitcase. You can easily fit it into your trunks for a trip anywhere.

Project details: billpounds.com

11. Build A Custom Rifle Rack

Custom Rifle Rack

When it’s closed, it’s just a simple cabinet. Who can imagine that there is a collection of guns resting behind its doors?

This premise makes this plan the best choice for people interested in hiding their weapons.

You also don’t need to build the cabinet from scratch. Just find one that’s not in use, and then customize a rack with suitable dimensions. Once you have all the measurements, you just need to build a box according to them.

Finally, add in the barrel as well as buttstock rests for the guns and fit the whole thing in.

Project details: instructables.com

12. Cheap DIY Gun Rack

Cheap DIY Gun Rack

With just one glance, you can immediately see that this gun rack is special with how its gun cradle is designed.

Instead of the usual straight configuration, this gun cradle is built from a small wooden round.

As a result, it can easily store a huge number of guns, 18 to be exact, without taking up too much space.

This design also makes it much easier to grab the guns and get them out right away whenever you feel the need.

The heart of the project is clearly the gun rest, which you can build by cutting 18 evenly spaced half-circles with a hole saw guide bit.

Project details: outdoorlife.com


With this list, you have known to 12 very interesting and completely free DIY gun rack plans.

Yet there will be no all-around projects, and each of them is suitable for specific situations. So think twice and find one that satisfies your needs at large.

Don’t worry if you are new to woodworking, these plans are easy to build.

We believe that the only thing you need to do is follow the guides to a tee. What are you waiting for? Let’s start building right away!

Leave a Comment