13 DIY Bow Rack Plans and Ideas You Can Build

DIY Bow Rack Plans

Whether you’re a hunter, seasoned archer, or just getting into the sport, you know the importance of having a good bow rack.

Not only does it keep your bow safe and organized, but it also helps protect your arrows from being damaged.

If you want to build a new bow rack by your own, then you’re in luck. Check out these 13 DIY bow rack plans.

They include everything from simple racks to complex wall-mounted units. So whatever your needs may be, you’re sure to find a plan that’s right for you.

Let’s dive into it!

1. DIY Simple Bow Rack

DIY Simple Bow Rack

Building this bow rack is a relatively easy DIY project that can be accomplished in just a few hours with the right materials.

The cost will depend on the type of wood used, but will likely be around $20. All of the supplies needed for the project can be found at a local home improvement warehouse.

The bow rack is designed to hold 4 bows, but can easily be modified to fit more or less depending on your needs.

The rack is made from a simple frame with adjustable arms that can hold bows of any size. It can be bolted to a wall for extra stability, and also includes slots for hanging targets.

This simple bow rack is an easy and inexpensive way to store your bows while keeping them ready for action.

Project details: oneprojectcloser.com

2. Build A Archery Bow Rack

Build A Archery Bow Rack

This plan will show you how to build an archery bow rack that can hold up to three bows. The rack is two feet wide and three feet tall, with a bottom bin to store equipment.

You will need two eight-foot boards, 1×4 lumber, 1 1/4″ Kreg screws, shelf pins, and a drill.

First, cut the boards to size and drill pocket holes. The pocket holes should be drilled at a depth of 3/4″.

The top and bottom boards should be secured to the cross braces, and the sides should be secured to the cross braces.

The shelf pins can then be inserted into the side boards. The rack can be finished with stain and shellac, and it can be mounted to the wall with 3″ screws.

Project details: instructables.com

3. DIY PVC Bow Rack By Hunt Addicts

DIY PVC Bow Rack

If you’re looking for a place to set your bow down while retrieving your arrows, look no further than this easy and inexpensive PVC bow rack.

It is perfect for keeping your bow off the ground and a place to put arrows while target shooting.

The rack is easy to assemble and can be adjusted to fit any bow length. It also has space to store extra arrows.

With this bow rack, you’ll never have to worry about where to put your bow down again.

Project details: huntaddicts.com

4. Make A Compound Bow Rack By Popo’s Woodworks

The bow holder is a simple design that can be made with materials that are easily accessible.

The holder consists of a piece of wood that is cut to fit between two studs, and two other pieces of wood that are screwed to the back of the holder.

This design allows for three bows to be hung on the holder, with each bow hanging from its own dowel rod. Additionally, there is a small shelf on the bottom of the holder for storage.

It is a great option for those who have paneling in their basement, as it allows you to hang hooks without damaging the wall.

The screws that are used to attach the holder to the wall are hidden by the paneling.

Additionally, because the holder is hung between two studs, it is very sturdy and will not move around when bows are added or removed.

5. How To Make A Homemade Bow Rack

This bow rack is easy to build from one pallet and lost less your cost. It’s a great way to show off your bows when you’re not using them.

To make the rack, start by removing the front piece of the pallet. This will become the back of the rack, and it needs to be reinforced so it can hold the weight of your bow.

You can do this by moving the front pieces to the back of the pallet and screwing them in place.

Once the front is reinforced, add a 2×4 to the top of the pallet and screw it in place. This will provide a sturdy base for your bow and arrows.

Finally, add two hooks to the front of the rack so you can hang your bow and arrows.

With this easy-to-follow design, you can make a homemade bow rack that will keep your bows and arrows organized, safe, and ready to use.

6. DIY Bow And Target Stands By Archery360

DIY Bow And Target Stands

PVC pipe is an excellent material to use for building bow and target stands, as it is strong and easy to work with.

You can create a basic stand by simply placing several pipes in the ground, or add additional features like arrow holders or a cup holder.

If you want to be able to leave your target out in the yard without worrying about weather damage, you can build a cover for it using wood.

Creating bow and target stands from scratch is a fun and rewarding project that anyone can do. With a little bit of effort, you can make stands that are both practical and stylish. So get creative and start building!

Project details: archery360.com

7. How To Build A Budget Friendly Bow Rack By Outdoor Life

How To Build A Budget Friendly Bow Rack

The plan provides instructions on how to build a bow rack, which can be used to store traditional or compound bows. This project is budget-friendly and highly functional.

The first step is to sand the boards and vacuum any sawdust left behind. The boards should then be stained with an oil-based stain, and a clear coat can optionally be applied.

The straps for the bow rack should be measured and snaps added to one end of each strap.

Then the straps should be nailed in place on the rack, making sure they are even on both sides. The rack can be decorated with additional items if desired.

Project details: outdoorlife.com

8. DIY Bow Rack From Lumberjocks

DIY Bow Rack From Lumberjocks

The bow stand is constructed from solid poplar wood and features an easy-to-clean linseed oil finish.

The stand is designed to hold takedown bows, and comes with pre-drilled holes for mounting the cabinet to the backstop. The door hinges are barrel hinges, and the door knobs are shaped antlers.

This project is perfect for the deer hunter’s home or cabin, and makes an excellent addition to any office.

With its simple design and easy assembly, this bow rack is a great way to showcase your bows and arrows.

Project details: lumberjocks.com

9. How To Build A Bow and Arrow Rack

In this plan, you will learn how to make a bow and arrow rack for about 20 dollars.

This rack is a great solution for anyone who owns a compound bow and arrows but doesn’t yet have a place to store them.

The video includes a description of all of the materials, supplies, and tools needed to make the rack, as well as a step-by-step visual demonstration of how to make it.

This rack is easy to make and can be customized to fit your needs.

10. Traditional Archery DIY Bow Rack

This plan is about how to make a simple wooden bow rack out of barn wood. The rack is designed to hold storing traditional bows such as recurve and long bows.

The materials needed for the project are a piece of barn wood around 2 feet by 3 feet, a mason jar or other type of jar, distilled vinegar, steel wool, and some screws.

The project is very cheap and easy to make, and it looks classic and great when finished.

11. How To Build A PVC Bow Stand

How To Build A PVC Bow Stand

The rack is made of PVC pipe and fittings, which can be easily trimmed to fit your needs.

The arrow holders are made out of 2″ PVC and can hold up to 6 arrows each.

The rack also includes a base and vertical support, which are both glued in place. Also, it ncludes foam pipe insulation to protect your bows.

The stand feels great and is very sturdy. It can easily be trimmed down to 9 or 10 inches without issue if needed, and the arrow holders can fit any size of arrows.

Finally, the rack can be easily assembled and taken apart for storage. This is a portable rack for any bow hunter or archer.

Project details: bowhunting.com

12. Homemade DIY Bow & Arrow Rack Under $30

The homemade bow rack described in the video can make easily using a drill and some basic carpentry skills.

The rack is designed to hold two bows, and includes an optional storage area for arrows or other gear.

It can be stained or burned to give it a rustic look, and can be mounted to the wall or hung from the ceiling.

With some simple modifications, the rack can also be used to hold antler sheds. This versatile and easy-to-make rack is a great addition to any hunting or fishing camp.

13. Building A Bow Rack For Recurve and Longbows

The bow rack installation process can be a little tricky, but with a little patience and some careful measurements, you can easily install this rack in your home.

The first step is to measure and cut the wood according to your specifications. Next, you need to find the center of the wall and mark it with a pencil.

Then, use a level to make sure that your wood is properly aligned before screwing it into the wall.

Once it’s securely in place, you can start installing the hooks. Finally, hang your bows on the hooks.

This project takes some time, but it’s definitely worth it in the end.

Conclusion

A bow rack is a great way to keep your equipment safe, organized, and out of the way.

There are many different ways to make a rack, and you can easily find them from the above 13 plans.

Choose a DIY bow rack plan that fits your needs and budget, skills and get started on your project today. With a little time and effort, you’ll have a beautiful and functional bow rack in no time!

Leave a Comment