As an Amazon Associate I earn from qualifying purchases - at no extra cost to you!

7 Best Mini Table Saws 2021 – Reviews & Ultimate Buying Guide

best mini table saw

Hobbyist woodworkers do not need a full-size cabinet table saw. It is overkill even for some who are working on a commercial scale. Pushing around a jobsite table saw is not the first option either.

What is suitable for them, that’s compact and lightweight as a mini table saw. This type of saw does not have much power but is portable, easy to use, and inexpensive.

So if you only work with small and DIY projects, check out this article about the best mini table saw reviews.

What Are The Mini Table Saw Used For?

Mini table saws can be an entrance for many hobbyist woodworkers. They have the basic functions of a standard table saw but are much cheaper.

Their size is also suitable for those who work in their garage or the corner of the workspace.

They are often used for home repairs and improvement. Many art and craft projects would require a mini table saw.

For example, a welcome sign, a plant stand, wooden wall decorations, and a wooden coat rack, etc…

7 Best Mini Table Saws – Reviews

1. DEWALT Table Saw (DWE7485)

DEWALT Table Saw (DWE7485)

This machine produces a substantial amount of torque. Even at 5800 RPM, it goes through stocks easily.

We have tested many materials on this saw. Whether we use plastic or hardwood, there is no sign of scorching or melting. The workpieces came out fine. There was also melting on the blade plastic insert.

This brings us to the next point – its blade insert and bevel function. You can easily remove the blade insert to change the blade. With other mini models, you may have to take out the whole housing.

Also, the blade insert and the bevel gauge allow you to tilt the blade up to 48 degrees.

The ripping capacity of this power tool is worthy of mention too. You can split up to 24.5 inches of wood. The rip fence moves on a rack-and-pinion system, which is quite steady.

About safety, the riving knife and the guard will protect your fingers the entire process.

If only it supported dado blades, the machine would be perfect. However, dado cuts are not something one should expect from mini table saws. To make tounges and grooves for joints, you will have to make multiple cuts.

After purchasing, check if the blade and the riving knife are out of the square. They will be only out about 0.5 to 1 degrees if any. Other than that, everything is ready to go.

Pros
  • Large rip capacity for sizable lumbers
  • Plenty of speed for carpentry-related purposes
  • Excellent quality build to last a long time
  • Suitable for contractors and beginners alike
  • A combination of power and precision
  • Removable blade insert for bevel adjustment
Cons
  • Hard to install a riving knife
  • Quite Expensive

2. Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw

Rockwell RK7323 BladeRunner X2

Not exactly a traditional table saw, but it still has a tabletop. Its versatility is the same as well. The 17-inch top will be your all-purpose cutting board. It can cut wood, plastic, ceramic, or metal.

You will even get a wood blade for scroll cuts and one for smooth cuts. This is a huge plus point for those who need diversity in their DIY works. Just do not feed your workpiece too fast, and everything should be fine.

This one actually has a jigsaw blade instead of a circular blade. The blade goes up and down at high speed instead of spinning. The chance of facing a kickback drops dramatically with this blade type. There are no back teeth to lift up the wood during a cut.

About cutting angles, the tool is also quite capable. You can do crosscuts, rip cuts, miter cuts and scroll cuts with it. The miter gauge and the rip fence work fairly well. There is no bevel feature, though.

As convenient as it could be, the saw might disappoint if you need something more solidly made. The Rockwell sometimes rocks too well, which might affect the precision of the cut.

A few clamps are necessary to hold down the machine onto our bench. The standard guard and the arm need similar attention.

There’s also room for improvement in durability. An accidental drop from a short height could crack the housing.

Pros
  • A great choice for entry-level woodworkers
  • Work for all materials as ceramic tile, wood, aluminum, plastic, and metal
  • Lightweight for quick transportation
  • Support all cuts for projects
  • Safety switch to prevent accidental start
Cons
  • Fail at accuracy sometime
  • Not very durable housing
  • Shake quite a bit when running

3. Worx WX572L Portable Electric Table Top Saw

Worx WX572L Portable Electric Table Top Saw

It’s safe to say that Worx WX572L makes the best bet for untrained fingers, evident in its availability of preventive measures.

The efficient motor that spins at 3000 RPM for no-load speed uses its safety switch to rest the notorious unintended trigger common among powered motors.

This model might not take the lead in generating a fitting amount of rotation for each material around your workstation.

For the most part, it tackles non-complex cuts only, but 3000 is no laughing matter when moving fast. The addition of this feature thus allows a safer pre-sawing assembly and free your mind of injury risks.

During the operation, while your hands run around the surface, feeding wood chunks to the blade, you can expect the ripping fence to guide them where they need to be for a clean, straight cut.

The security is then taken to another level with the riving knife system attaching itself to the back of your blade, ending the kickback no woodworker wants.

However, it’s worth keeping in mind that the saw belongs to the light-duty territory. If you take your hobbyist duty seriously and have put together sophisticated creations before, there isn’t much it can do.

Another thing that irks us is the exceptionally lightweight of less than 15 pounds, making sideway shifts a foreseeable part of the process.

As we have mentioned earlier, this might reduce the accuracy of your cut without a watchful eye. This also indicates that you won’t be able to use it hand-free like what the package says.

Pros
  • Super lightweight and compact saw
  • Handle a wide variety of materials
  • Work for all simple house projects
  • Safety features to protect unskilled fingers
  • Have tools that support miter cuts and rip cuts
  • Easy setup in seconds
Cons
  • Light-duty only
  • May shake during operation
  • Hand-free sawing isn’t recommended

4. PROXXON 37070 Table Saw FET

ROXXON 37070 Table Saw FET

PROXXON Table Saw is a high-performance machine for those spending their days fine-tuning their handmade piece to perfection. Don’t be deceived by how little it seems at first. The motor under the hood pumps out up to 7000 RPM after you press the start button.

This sheer powder turns not only woods but your typical non-ferrous alloys and fiberglass sheet into neat slices, so long as you install the right blade beforehand.

Combined with the longitudinal stop for micro-adjustments no larger than 0.004 inches in the package, it forms the ideal conditions for intricacy in your woodwork (or metalwork).

There’ll be a whole world of applications ahead if your creative mind often directs you to a dollhouse or architectural item where every fine detail counts.

To save time and double the precision in your cut, try adjusting the mini saw’s height and put the angle stop to proper use. It’s designed to tilt the blade down to 45 degrees, so doing that should put straight double-miter cuts in the materials.

That’s said, the experience wouldn’t be enjoyable when you rush the first few seconds and shove in the workpiece too fast, as the blade might oscillate. What you obtain after the sawing isn’t the cleanest either.

Pros
  • Extended support for cross cuts
  • Very fast-spinning blade
  • Easy to use and adjust
  • Support all carpentry-related cuts
  • Build die-cast aluminum for stable constructions
Cons
  • The blade might oscillate
  • Final products have rough edges

5. Huanyu Mini Table Saw

Huanyu Mini Table Saw

This Mini Table Saw is an attractive option to embrace Jobsite professionalism in your makeshift workshop.

Its cutting mechanism operates at 9000 RPM in total, a top-of-the-line speed range that rivals offerings from those less portable Jobsite carpentry saws.

The result is a wider application in DIY work, with almost no limit for the blade to install or the material it cuts through.

We find this another favorable thing about the saw. You may feed hardwood, plastic, acrylic, or non-ferrous alloys to the blade, yet the cuts remain uncompromisingly accurate and neat all the time. As minimal as it is, there has been no sacrifice in functionality.

The top where the main sawing action takes place holds even more surprises. For you to achieve the ideal cut in the first attempt, the little blade can lift or lower itself with some simple configurations. 1.14 inches is the maximum cutting depth, which is quite a number for a small-scale project’s workpieces.

And don’t think too much about brushing your fingers on the spinning teeth during the task. This saw has placed a transparent baffle between you and those sharp edges.

You don’t lose the visibility to keep track of the cut, and the safety factor remains strong!

The model has its drawbacks, however, mostly about the overall design.

We still can’t fathom the reason why the brand paid so little mind in using solid connectors for something so well-made, particularly in the rip fence.

And why they built a working surface so modest if they planned to pair it with advanced sawing features.

Pros
  • Ultra-smooth cuts on many materials
  • Support grinding, drilling, engraving
  • High-torque motor to accommodate a range of blades
  • Liftable blade for different cutting depths
Cons
  • Flimsy rip fence screws that need replacement
  • A little small for some projects

6. NovelLife Mini Hobby Table Saw

NovelLife Mini Hobby Table Saw

NovelLife Mini Hobby Table Saw is a high-return investment for those with not the budget to materialize it.

There has been no considerable concession to the lower cost, as it still packs enough power to reach 5000 RPM each operation – a good match for home repairs and other small projects.

The outer shell that stores this minimal powerhouse is pure steel, providing the necessary support to last the intense actions inside through heavy use.

And to ensure that the saw itself is up for this grand task, a full assortment of three versatile blades is going to join the cutting process.

We are looking at a 2.5-inch high-speed blade, an alloy steel blade of the same diameter, and a 2.4-inch diamond blade to cut PCB board. The last one is already a sawing unit of its own, shearing apart wood, acrylic, plastic, and aluminum with zero faltered motion.

This table saw also has a miter gauge that you can easily cut with different angles, So it will give satisfy your precision cutting needs.

Before proceeding with the purchase, please note that understanding the ins and outs of this saw might take a while, as all the instructions are in Chinese.

More importantly, the body and the working top being one unit means that you’ll have to take it all apart to replace the blade. Not a fatal flaw, but an inconvenience.

Pros
  • Adjustable blade height for more cutting accuracy
  • Work on multi-materials as plastic, wood, PCB board, aluminum and metal materials
  • Include 3 bonus blades
  • Low-noise engine
  • Affordable price
Cons
  • Difficult when replacing blade
  • Instructions by Chinese

7. Multifunction Mini Table Saw

Multifunction Mini Table Saw

What we like the most about this saw is the 7-class adapter. With it, you can adjust the spinning speed of the blade.

If you are about to cut something tough, reduce the spinning speed a bit to take up more torque. For cleaner cuts, an increase in spinning speed will be helpful.

The usefulness of these speed settings even extends to the drill function. With a 0.5 inches drill bit, you would want to take the RPM down to about 2300 for aluminum.

We are also a fan of its portable design. It is a breeze to carry this under nine-pound saw around.

When you put it down, the machine stays still enough, thanks to rubber feet. We still recommend you build a bench for it, both to add stability and to extend the cutting surface.

You face a similar issue as with the NovelLife: No English guidance. It does not help that the machine comes unassembled.

Another minus point is the lack of blade height adjustability, let alone a bevel feature.

Pros
  • Anti-slip design for extra safety
  • Good quality build
  • Cut thick wood for the size
  • Decent accuracy, no oscillating blade
  • Can adjust variable speed settings
Cons
  • No English instructions for assembly
  • Motor active poorly
  • Design of the switch on/off is quite stiff
  • Some reports electrical issues from users

Things To Consider When Buying The Best Mini Table Saw

Mini Table Saw

Power

The RPM is on the list of key features for power, as it decides whether or not your workload is completed at the end of the day.

RPM means revolutions per minute. This rotation speed of the shaft varies from one saw to another, starting as low as 3000 RPM and running over 10000 RPM, perhaps beyond. The higher is better.

The manufacturers boast about this index of their products. However, that is not what you should be looking at.

Horsepower is way more reliable to determine power. In simple terms, imperial horsepower = (Amperage X Voltage) / 746. So if your motor is 15 amp, it can produce about 2.4 horsepowers with a 120V electricity system. A 10amp motor only has about 1.6 horsepower.

Design

A good design gives you stability and convenience. Your mini table saw should be substantial enough to stay still during operation. The ability to attach to a stand is a plus point.

Some models do not let you adjust the saw without opening the housing. That is a significant disadvantage in our eyes.

Other things you should avoid include impractical small designs not enough sturdy, inaccurate gauges, and difficulty when carrying.

Miter Gauge

The miter gauge is the sole supporter of the materials in your hands during the making of consistent crosscuts at custom cutting angles.

It clamps down onto the thick wood like a vice, concreting it in place as the sharp blade spins through.

You can also readjust it to different positions desired for the job. Almost the miter gauges adjust from 0 – 90 degrees.

Rip Fence

Rip fence and miter gauge are similar in the way they allow more cutting accuracy. But while miter gauge is there for the crosscuts, the role of rip fence is to keep wood ripping straightforward.

Once aligning the part with the blade, you can use its entire length as a cutting guide to cleanly separate the wood in the direction of the grain.

You’re likely to find this helpful rip fence positioned on the right of the blade by default. But that’s not to say you can’t relock its placement to get the right angle for the cuts.

While looking at the rip fence, spare the rip capacity some of your time as well. It’s the gap sitting between the blade and the fence when you’ve finished with their setup.

Most professionals would prefer extending it to as far as 24 inches to accommodate larger lumbers. Then again, we’re on the mini table saw and small to medium projects, so there’s no issue with a minus of an inch or two.

Adjustable Blade Height

Blade height adjustment matters because of safety and cut quality. Manufacturers often recommend raising the blade high enough for the gullet to be just above the workpiece.

You would also want to adjust the blade height to fit the situation and cut thicker materials. Scorch marks often mean your blade is too low.

If your blade is too high, you will get more tear-out. For thin plywood, one would want to raise the blade to help hold down the piece.

mini table saw reviews

Bevel Capability

While being a standard feature on normal-sized table saws, bevel adjustment does not exist in every mini model.

If a model is capable of bevel cuts, you should still want to check the maximum bevel angles. It can be up to 60 degrees to cut angles.

Remember that the blade inserts in mini table saws is usually irremovable. Their blade can only tilt as far as the insert allows.

Safety Features

Safety comes first! Before digging into your pocket for a functional mini table saw, you should consider extra add-ons that reduce all potential risks.

  • Riving blade: A protection device that moves in unison to the blade. By keeping the cut from closing completely around the rear edge, it brings a fluid performance without any kickback. (You may achieve the same results using other attachments, such as splitter or anti-kickback pawls)
  • Push stick: It does the hard and risky work of nudging the hardwoods towards the high-speed blade so that your precious fingers don’t have to.
  • Blade guard: A firm plastic piece that hovers over the blade to safeguard your fingers from whatever pain the saw might consign them to.

Durability

A small size does not equal a frail build. Your mini table saw can still be as sturdy and long-lasting as you want.

We recommend you to go for quality metal materials or cast iron with high heat and corrosion resistance. Plastic can even melt in industrial-grade saws, let alone home use ones.

Saw Blades

  • Blade Sizes And High RPM

Most mini table saws use 4-inch blades. If your saw use a smaller one, some may call it a micro table saw. With such small sizes, these blades do not have a lot of problems handling high-speed motors.

10000 is the maximum RPM for 6 ½-inch blade and mini table saws rarely can produce higher RPM. So do not worry too much about high-speed with these 4-inch blades.

However, if the products come with a high-speed blade, you should use it to avoid unwanted incidents.

  • Material

Alloy blades are popular among mini table saws. They are enough for wood, arcylic, and ABS. For tougher materials, such as steel or gemstones, you should use diamond-edged blades.

Accessories

Many models have an extended shaft for extra table space. Other accessories include diamond-edged blades, high-speed blades, polishing discs, wrenches, push sticks, and dust extraction port.

Safety Tips When Use Mini Table Saw

Safety Tips When Use Mini Table Saw

Wear Safety Equipment

Safety glasses (or eye shield) to barricade your eyes from flying chips and hearing protection in case it gets too loud for comfort is mandatory.

And keep in mind that there shouldn’t be anything on your arm that the blade might pull in.

Use Safety Features

The saw itself must feature some preventive measures against workplace injury, so check to see if they’re in good shape or not.

If your model has its own riving knife system (or splitter and anti-kickback pawls), adjust them properly and double-check one last time before turning on the motor.

In the same fashion, push sticks and blade guards have to be in their right spot to distance your hand from the blade.

Maintain a Good Posture

Don’t stress yourself out; just maintain a comfortable and solid stance as you feed the materials to the blade.

It’s also advisable for your footing to be on the left of the saw as you make the cut. That automatically places the blade between you and the fence (on the right for the most part).

Try To Spin The Blade Before Cutting

You should make sure that the blade is free to spin before plug in the machine. It is extra important after making an adjustment.

Many things can get into the small space inside your saw and cause problems.

Check Your Workpiece

A nail or a knot in your stock can cause a kickback. Your motor and blade may face some damages too. So before making any cut, ensure that your workpiece is safe to cut.

Use A Push Stick

Six inches are the minimum distance between your hand and the blade in standard table saw. With mini models and small projects, there are often not enough room for that. So always use a push sticks or a push block.

Do Not Go Freehand

You may tempt to go freehand with a small stock, especially when the safety plastic sheet is blocking your push stick.

Remember to use your fence all the time. You should also try to create a few jigs for common cuts on your saw.

Don’t Remove The Workpiece Too Soon

Wait for the blade to stop completely before removing the workpiece. Lifting or pushing the workpiece to a side when the blade is still spinning may lead to a kickback.

Frequently Asked Questions About Mini Table Saw

faqs mini table saw

Can You Use A Mini Table Saw On A Stand?

Yes, you can, and you definitely should, as a matter of fact. The stand itself serves as a stability enhancer for your saw, thus creating a suitable cutting environment to achieve more accuracy.

A foldable stand is great for outside work while a cabinet-like stand provide more support and storage room. Remember to secure these portable table saws before cutting.

How Do You Clean A Mini Table Saw?

It’s a fact that ceaseless use of the saw filled with junk buildup hinders the operation. You have to get rid of it once in a while; otherwise, your tool will meet an early retirement before you even realize it.

The good news is that the process won’t sap much of your time or strength and requires no complex tool but an air compressor.

Why Doesn’t Your Table Saw Cut Straight?

Failing to run a straight cut through the wood is frustrating, so let’s get to the bottom of the problem and solve it once and for all.

  • Your wrong technique: When you haven’t got used to the tasks yet, your cutting technique is likely to take the blame. Rehone it. Pull yourself into the right stance, but all the fence, miter gauge, or another assisting tool to use, and you’ll see a difference.
  • Misaligned blade: Can the blade and the cutting surface form a 90-degree angle when measured with a T-square? If not, readjust it and try to make a cut once more. It should be straighter by now.
  • Damaged/ warped blade: If your blade seems off, there’s a good chance that you need replacement as soon as possible. A poorly functional blade rarely gives a cut that pleases you.

Why Is Your Mini Table Saw Smoke?

It’s not the end of the world, so remain calm. Smoke happens from time to time. And while it’s not at all a good sign, it doesn’t put the saw at stake, if that’s what you think.

Smoke is often emitted as a result of friction, which occurs in a dirty blade with weeks of buildup clinging on its side.

A long wash in cleaning solutions, as we have instructed earlier, will stop it from being a problem.

Certain that there’s nothing wrong with the blade? Go over the feed speed next. When your materials can’t withstand how fast the blade spins against their texture, overheating is unavoidable. Smoke rises from that.

How Do You Clean The Blade For The Mini Table Saw?

The blade on your mini table saw should also always be well-maintained, or else its performance will diminish and even put you at risk.

Follow this brief guide if you need some help on the matter.

Step 1: Soak your blade in a strong cleaning agent to wash away the buildup of pitch, tar, and resin after its endless contact with the wood fiber.

(Mixing one part of the cleaning solution with two or two parts of water should clean it all up. But you might want something more concentrated for thickened buildup)

Step 2: Scrub your blade to remove the residue that has yet to be stripped away. Don’t press too hard; you wouldn’t want to further damage the cutting tip.

Step 3: Dry the blade. A blow dryer will send air through each little detail and speed up the project

Step 4: Lubricate the blade properly to keep it safe from rust.

Can A Mini Table Saw Cut Metal?

It’s hard to reach a satisfying answer for this one. You have to know that the deciding factor in whether what can and can’t be cut is the blade. The motor has little to do with it.

If the manufacturer states specifically that the speed is suited for metalwork, then you can trust it to deliver a clean cut as long as the teeth on your blade can take on the hard texture.

But don’t place high hope in models that are too small. Their motor isn’t an ideal choice for anything other than basic woodwork.

Conclusion

The best mini table saw on our list is the DEWALT DWE7485. Bearing a reputable brand, it delivers reliable cuts, power, and safety.

Its gauges are correct and the motor is strong. It can take on notable larger projects compared with other mini table saws.

The Worx WX572L is also great another option. With a jigsaw blade, it can make detailed cuts for models and decorational pieces. The cuts are always clean. This model is suitable for various projects as it can cut tile, wood, aluminum, plastic, and metal.

Mini table saws trade power and capacity for portability and compact sizes.

However, what constitute a great mini table saw are still the same. They are the motor, the blade, the adjustment system, and the accessories.

You should adhere to all safety requirements of standard table saws too.

Leave a Comment